2in1 Design Fan Heater CA-904G

The high-end ceramic Clean Air Optima® Design PTC fan heater is the perfect solution to provide or supplement heating for comfort in your indoor space. Its 1000/2000 Watt rating efficiently heats indoor rooms up to 40m² / 100m³ on cool days, during the change of seasons or when the cold weather comes on suddenly. The energy-efficient CA-904G fan heater has two setting options for the PTC heating and the fan, a timer for switching off (1-12 hours) and an adjustable thermostat to automatically regulate the desired temperature. With its powerful, dynamic airflow, the CA-904G fan heater acts as a fan with cooling breeze in summer.

The energy market is changing! - simple plug&play method for natural gas-free (supplemental) heating.
With the ceramic Clean Air Optima® CA-904G Design PTC fan heater electric heating, you can easily use energy generated from your own renewable sources (e.g. solar panels), to heat or add heat to your spaces. You will achieve substantial energy savings by doing so. Electricity is seen as the energy source of the future for good reason.
CA-904G Design fan heater
Suitable for rooms up to 40m² / 100m³ / 430ft²


Fan for cooling on warm days
Thanks to its built-in vertical rotor fan, with a dynamic air flow of 5 metres per second, the CA-904G fan heater provides a gentle or stiff cooling breeze.


2 in1:
With the heater switched off, the CA-904G works as a fan during the summer, with a cooling breeze.




PTC system: Positive Temperature Coefficient heating element

This Clean Air Optima® CA-904G PTC fan heater has an up-to-date “Positive Temperature Coefficient” (PTC) heating element consisting of ??special large aluminium fins that provide better conduction than standard heating systems. The PTC heating element can adjust the heat output, thereby consuming less power and providing energy-saving, quiet and consistent heat in the space. This rapidly creates a pleasant temperature in the furthest corners of the room!





Thermostatically controlled temperature between 15°C and 35°C

With the adjustable thermostat the Clean Air Optima® CA-904G Design PTC fan heater reacts to the room temperature. The heater stops heating once the pre-set temperature has been reached. The heating switches on again automatically if the temperature falls by a few degrees.




80° horizontal oscillation

The switch-operated 80° horizontal oscillation on the Clean Air Optima® CA-904G Design PTC fan heater ensures effective and even distribution of heating and cooling, even in the furthest corners of the space!


Simple operation with digital display

The clearly set out digital control panel on the top of the CA-904G Design fan heater features six touch keys for easy selection of the desired settings. In addition, the fan heater is also equipped with a remote control.

CA-904G Design fan heater setting options:
• Switching fan heater on and off
• Desired temperature can be set between 15-35°C
• Heating speed (high-low)
• Cooling speed (high-low)
• 80° oscillation (can be switched on and off)
• Timer function for switch-off time (1-12 hours)
• Current temperature display in °C




Low-noise fan heater with energy-efficient system

The CA-904G fan system has two fan settings.

The ceramic Clean Air Optima® CA-904G Design PTC fan heater enables you to enjoy maximum comfort without wasting energy, thanks to the effective PTC heating system.
Rapid heating up from 10°C to 22°C in just 23 minutes
How-to videos

Usage and maintenance

Cleaning

First use: Please refer to the comprehensive instructions in your manual before first use.

Cleaning the outside of fan heater:
1. Switch the unit off and pull the plug out of the socket.
2. Make sure the heater has cooled down before carrying out cleaning or maintenance.
3. Use a soft damp cloth to remove dust and dirt from the unit.
4. Make sure no water gets into the unit.
Cleaning the dust filter:
The permanent metal dust filter is located on the side of the fan heater. For optimum effect, this permanent dust filter in the Clean Air Optima® CA-904G Design PTC fan heater can be cleaned at monthly intervals with a soft brush or your vacuum cleaner.

1. Switch the unit off, pull the plug out of the socket and leave the unit to cool down completely.
2. Press both unlock buttons and take the dust filter out of the unit.
3. Use a vacuum cleaner to clean the dust filter and a soft damp cloth to clean the fan heater housing for the dust filter: then dry carefully.
4. Replace the dust filter, pushing it in carefully until you hear a click.
To avoid damaging the unit and the PTC heating elements do not use harsh cleaning products to clean the surface.

Keep the fan heater in a dry, well-ventilated place.